our services & prices
At our Territory Weigh headquarters in Howard Springs (Darwin NT), we have a dedicated custom weighing pad. We offer clients the ability to relax during the weighing process in shade and we have room for kids and dogs to play in a fenced and gated location. We also offer our clients the choice of topping up their water tanks after the weighing process should they need this before moving on with their journey.
Of course we can also weigh you at any suitable location as we are fully mobile.
We also have 2 sets of scales (8 scales in total) and can therefore weigh tri-axle caravans and or trailers. Our scales are rated to 2.5 Tonne per corner, meaning we can weigh any dual axle combination to 10 Tonne in total. Our second set of scales are rated to 1.5 Tonne per corner, meaning we can weigh tri axle trailers/vans/boats to 13 Tonne in total.
With the Travelling Weigh, Cam & Ang’s scales are also rated to 2.5 Tonne per corner, meaning they
can weigh any combination up to 10 Tonne in total.
Our combination weighs generally take around 2 hours, however we allow 3 hours between appointments just in case there are complications or issues that we identify and attempt to resolve on the day.
Vehicle Only Weighs
(Tow Vehicles, Trade Vehicles, Race cars, Go Karts)
If you are planning a vehicle build or wanting to know what your current vehicle weighs and how much “room” is left in your compliance numbers, then a vehicle only weigh is for you!
We will provide you with our detailed vehicle only weigh report showing individual corner weights, axle weights and overall GVM and available room in GCM numbers.
Should you wish to remove anything from the vehicle or move anything around within the vehicle on the day, while you are on the scales, we will also provide you with updated numbers for alterations made.
Tow Vehicle Only Weigh
incorporating caravan/boat/trailer numbers
(includes estimated towball and axle calculations)
If you are considering purchasing a caravan/boat/trailer and want to know whether it is “right” for your current vehicle, we can help! We offer a pre-purchase or planning service whereby we weigh your tow vehicle and in addition to our detailed report on your vehicle, we provide additional reporting with respect to the proposed caravan/boat/trailer by incorporating an estimated towball download figure into the vehicle GVM calculation, vehicle axle numbers and overall GCM position. We then discuss your individual position with you and advise on any variables and options.
Tow Vehicle and Caravan Weighs
Our most popular weighing consultation is the tow vehicle and caravan combination weigh. Generally this takes between 2 to 3 hours.
We will provide you with a detailed report containing:
- Summary of your vehicle and caravan compliance numbers
- Summary of vehicle and caravan load (i.e. items in your vehicle and van)
- “Base” compliance numbers for tow vehicle and caravan (full of fuel in your tow vehicle and water in your caravan and all persons and gear)
- Detailed caravan and vehicle axle and corner weight numbers and analysis
- Caravan compliance and safety checklist
- Multiple variations to reports (both caravan and car numbers) for changes made on the day for such alterations as:
- Towball Height change
- Removal of load/gear from caravan
- Adding of load/gear to caravan
- Moving of load/gear within caravan to better balance van
- Removal of water from tanks (multiple)
Tow Vehicle and Trailer
Boat/Trailer/Car Trailer/Horse Float Weighs
If you have a boat, trailer, car trailer or horse float and are wanting to ensure you are legal, compliant and safe on the road then our combination trailer weigh is for you!
Ordinarily our trailer weighs take between 1 & ½ to 2 hours and we will provide you with the following:
- Summary of your vehicle and trailer compliance numbers
- Summary of vehicle and trailer load (i.e. items in your vehicle and van)
- “Base” compliance numbers for tow vehicle and trailer (full of fuel in your tow vehicle and all persons and gear in trailer that ordinarily travel)
- Detailed trailer and vehicle axle and corner weight numbers and analysis
- Trailer compliance and safety checklist
- Variations to reports (both trailer and car numbers) for changes made on the day for such alterations as:
- Towball Height change
- Removal of load/gear from trailer
- Adding of load/gear to trailer
- Moving of load/gear within trailer to better balance trailer including re-positioning boat on trailer or car/racecar on trailer
Motorhome Weighs
Whether you have a stand alone Motorhome or you are towing a vehicle or trailer/boat/caravan, we can weigh your setup.
We can weigh both single rear axle and dual rear axle ** motorhomes
**The Territory Weigh in Darwin only
Our motorhome weigh consultations take between 1 & ½ to 2 hours and we will provide you with our detailed motorhome only weigh report showing individual corner weights, axle weights and overall GVM and available room in GCM numbers.
Should you wish to remove anything from the motorhome vehicle or move anything around within the motorhome on the day, while you are on the scales, we will also provide you with updated numbers for alterations made. We also offer the ability for you to drop the water from the motorhome and re-weigh the motorhome with no water.
motorhome & trailer Combinations
Our combination motorhome and trailer weigh incorporates all of the above together with our detailed combination report
Ordinarily our motorhome and trailer weighs take approximately 2 hours and we will provide you with the following:
- Summary of your motorhome and trailer compliance numbers
- Summary of motorhome and trailer load (i.e. items in your motorhome and trailer)
- “Base” compliance numbers for motorhome and trailer (full of fuel and water in your motorhome and all gear in trailer that ordinarily travel)
- Detailed trailer and motorhome axle and corner weight numbers and analysis
- Trailer compliance and safety checklist
- Variations to reports (both trailer and motorhome numbers) for changes made on the day for such alterations as:
- Towball Height change
- Removal of load/gear from trailer
- Adding of load/gear to trailer
- Moving of load/gear within trailer to better balance trailer
Trailer TARE Weight Certificates
If you have a trailer and are wanting to register it and need a TARE weight certificate, then we can help!
We’re able to weigh your trailer at TARE and provide you with a detailed TARE weight certificate suitable to be provided to the relevant government authority.
Corporate & Fleet
We offer corporate and fleet businesses a tailored service where we can weigh multiple vehicles, trailers or combinations and provide you with all the numbers.
We currently service a number of businesses in Darwin and provide cost effective services which assist in reducing your time. Instead of wasting time taking vehicles and or trailers to weighbridges, we come to you on site and take the hassle out of this process!
If you’re a business with a string of commercial vehicles and or trailers and want to ensure they are compliant, legal and insurable then reach out to us today!